自動攪拌車發動機損壞的原因

 來源:http://www.rebetdrugs.com 日期:2022-08-23 發布人:jufeng
自動攪拌車經過長時間使用之后就會發生一些問題,例如發動機損壞的情況,下面小編就為大家介紹一下自動攪拌車發動機損壞的原因:
Some problems will occur after the automatic mixer is used for a long time. For example, the engine is damaged. The following editor will introduce the reasons for the engine damage of the automatic mixer:
一、氣門腳空地的調整,需要配氣安排各機件在正常運行的時候,隨著零件的磨損,氣門腳空地可能會發生一些改動。如果凸輪、閥桿端面和挺桿接觸磨損后空隙都會變大一些,門頭磨損后空隙又會變大,所以,調整時應取空隙的基值。
1、 For the adjustment of valve foot clearance, it is necessary to arrange the valve arrangement. During the normal operation, the valve foot clearance may be changed with the wear of parts. If the cam, valve rod end face and tappet contact and wear, the gap will become larger, and the gap will become larger after the door head is worn. Therefore, the base value of the gap should be taken during adjustment.
二、氣門座的鉸削,氣門座鉸削一般為手工業,在這我們需要注意消除凹陷。在斑駁的地方,能鉸出無缺錐面的基礎上,使氣門鉸鏈越小,就會好一些。還需要注意在消除凹陷??墒广q孔和鉸孔更少,然后是氣門試驗,判斷好作業面方位和寬度。
2、 The valve seat reaming is generally handicraft industry, so we need to pay attention to eliminating the depression. In the mottled place, the smaller the valve hinge is, the better it will be based on the fact that no missing cone can be hinged. It is also necessary to pay attention to eliminating the depression. The reaming holes and reaming holes can be reduced, and then the valve test can be conducted to judge the orientation and width of the working surface.
三、自動攪拌車修補質量差的修補作業突出的問題是氣門和氣門座作業面的加工質量達不到要求,構成作業面燒蝕。凹陷而前期損壞;凸輪軸軸承在刮削中其接觸面積。氣門和氣門座作業面加工質量達不到要求,從而導致磨損。凹陷而前期損壞。凸輪軸軸承在磨擦過程中所起作用的主要原因是氣門和氣門座的加工質量不能達到要求,從而導致磨損。
3、 The outstanding problem of the repair work with poor repair quality of the automatic mixer is that the processing quality of the valve and valve seat working surface cannot meet the requirements, which constitutes the ablation of the working surface. Dent and early damage; The contact area of camshaft bearing during scraping. The machining quality of the valve and valve seat working surface cannot meet the requirements, resulting in wear. Dented and damaged in the early stage. The main reason why camshaft bearing plays an important role in the process of friction is that the machining quality of valve and valve seat can not meet the requirements, which leads to wear.
以上就是為大家介紹的有關全自動自上料攪拌車價格的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.rebetdrugs.com/
The above is the detailed introduction about the price of the automatic self feeding mixer truck. I hope it will help you. If you have any questions, please contact us. We will provide you with services with a professional attitude http://www.rebetdrugs.com/