解析自動上料混凝土攪拌車底盤的保養秘籍!

 來源:http://www.rebetdrugs.com 日期:2021-09-23 發布人:jufeng
近年來,國家道路工程建設日益完善,全國各個省市修路工程也日漸繁多,坑洼的道路情況對平板車的底盤也是一個很大的考驗。正所謂“車爛先爛底”,我們在駕駛自動上料混凝土攪拌車的時候難免會有拖底的情況,所以自動上料攪拌車的底盤的保護可是非常重要的。
In recent years, the construction of national road projects has become increasingly perfect, and there are more and more road construction projects in various provinces and cities across the country. The pothole road situation is also a great test for the chassis of flat car. As the saying goes, "the bottom is rotten before the car is rotten", it is inevitable that we will drag the bottom when driving the automatic feeding concrete mixer, so the protection of the chassis of the automatic feeding mixer is very important.
不少車主新購平板車后,只顧著為愛車貼膜、封釉、鋪地膠等,卻很少人會考慮到為自動上料攪拌車的底盤采取一些保護措施。保護了自動上料攪拌車的底盤才能能確保車輛操作駕駛和車主的安全。
After buying a new flat car, many car owners only focus on coating, glazing and floor glue for their car, but few people will consider taking some protective measures for the chassis of the automatic feeding mixer. Only by protecting the chassis of the automatic loading mixer can the vehicle operation and driving and the owner's safety be ensured.
很多人在使用自動上料混凝土攪拌車的過程中都忽視了對底盤的檢修和保養的工作,其實根據眾多的自動上料攪拌車使用者的反應,由于沒有及時的對地盤進行檢查而導致后期的故障總是很多,外表看起來光艷照人,而底盤早已經銹蝕斑斑,漏洞百出,
Many people neglect the overhaul and maintenance of the chassis in the process of using the automatic feeding concrete mixer. In fact, according to the reaction of many users of the automatic feeding mixer, there are always many late failures due to the lack of timely inspection of the site. The appearance looks bright, while the chassis has long been rusted and full of holes,
這主要有以下幾個原因:夏日地表的烘烤,平日雨水的侵襲以及大氣中的潮氣、鹽分等都會侵蝕車底,導致車輛提前老化.路上各種砂石不斷撞擊汽車底盤與輪轂等部位,使出廠時底盤上所固有的防銹漆和鍍鋅層很快就會被破壞,從而讓金屬裸露在外,與水分接觸后導致氧化生銹.因此自動上料攪拌車的底盤也要經常做一下保養。
This is mainly due to the following reasons: the baking of the ground in summer, the invasion of rain on weekdays and the moisture and salt in the atmosphere will erode the bottom of the vehicle, resulting in the early aging of the vehicle. All kinds of sand and stones on the road constantly hit the chassis and wheel hub, so that the inherent antirust paint and zinc coating on the chassis will be damaged soon when leaving the factory, so that the metal will be exposed, Contact with water will lead to oxidation and rust. Therefore, the chassis of automatic feeding mixer truck should also be maintained frequently.