山東自上料混凝土攪拌罐車在添加潤滑油的時分應該要留心

 來源:http://www.rebetdrugs.com 日期:2021-10-13 發布人:jufeng
自動上料混凝土攪拌車該機器設備有時需求潤滑以在長期運用期間堅持杰出的功用。那么在為設備添加潤滑劑時需求留心什么?
Automatic loading concrete mixer this machine and equipment sometimes need lubrication to maintain outstanding function during long-term operation. So what should we pay attention to when adding lubricant to the equipment?
1.操作期間,請勿修理或潤滑自動上料混凝土攪拌車。
1. During operation, do not repair or lubricate the automatic feeding concrete mixer.
2.守時在每個潤滑脂嘴上參加黃油,每4小時用一個軸端密封潤滑油,每周排水一次。
2. Be punctual, add grease on each grease fitting, seal the lubricating oil with a shaft end every 4 hours, and drain water once a week.
3.運用自動上料混凝土攪拌車后,依據需求在每個潤滑點添加必要的潤滑劑(滾筒軸,滾筒,鋼絲繩,其他有用部件)。
3. After using the automatic feeding concrete mixer, add the necessary lubricant (drum shaft, drum, steel wire rope and other useful parts) at each lubrication point according to the demand.
4.自動上料混凝土攪拌車齒輪減速機齒輪和軸承運用齒輪旋轉將油送至油箱內壁并流向軸承進行潤滑。有必要在燃油表的兩條線之間堅持變速箱油位。假設油位過高或過低,每個部件的溫度將升高或潤滑缺乏,這將添加動力丟失并減少機器操作。
4. The gears and bearings of the gear reducer of the automatic feeding concrete mixer truck use gear rotation to send oil to the inner wall of the oil tank and flow to the bearings for lubrication. It is necessary to maintain the transmission oil level between the two lines of the fuel gauge. Assuming that the oil level is too high or too low, the temperature of each component will rise or there will be a lack of lubrication, which will add to the loss of power and reduce machine operation.
5.自動加料攪拌機選用的潤滑油不含特定粘度和粘度溫度特性,低凝固點,杰出的氧化穩定性,機械雜質和水分,耐腐蝕和耐磨材料。其質量指標有必要符合國家標準。
5. The lubricating oil selected for the automatic feeding mixer does not contain specific viscosity and viscosity temperature characteristics, low freezing point, excellent oxidation stability, mechanical impurities and moisture, corrosion-resistant and wear-resistant materials. Its quality index must conform to national standards.
自動上料混凝土攪拌車用于潤滑,減少磨損并延長部件壽命。但是,添加潤滑劑時要記住一些事項。應在初的150和300小時內替換新機器,以鏟除在檢驗過程中未完全清潔的污垢。工作時,查看油位并及時添加。
The automatic loading concrete mixer is used for lubrication, reducing wear and prolonging the service life of components. However, there are some things to remember when adding lubricant. The new machine shall be replaced within the first 150 and 300 hours to remove dirt that has not been completely cleaned during the inspection. When working, check the oil level and add it in time.
挑選自動上料混凝土攪拌車的留心事項
Precautions for selecting automatic loading concrete mixer
1.油箱容量挑選:由于小方攪拌車相對較熱,自動上料混凝土攪拌車在購買時需求留心小巧便當的外觀。當然,您需求依據需求購買。
1. Selection of fuel tank capacity: as the small square mixer is relatively hot, the automatic feeding concrete mixer needs to pay attention to its compact and convenient appearance when purchasing. Of course, you need to buy according to your needs.
2.判別自動上料混凝土攪拌車罐體的質量:罐體的質量主要是指罐體的厚度。目前一般5mm厚的錳板,業主能夠向廠家詢問罐體厚度,假設厚度小于5mm,則不需求考慮。
2. Judge the quality of the tank of the automatic feeding concrete mixer: the quality of the tank mainly refers to the thickness of the tank. At present, the owner can ask the manufacturer about the thickness of the tank for the manganese plate with a thickness of 5mm. If the thickness is less than 5mm, it does not need to be considered.
3.依據運行杰出的路程狀況:購買自動上料混凝土攪拌車時,需求依據運用情況設置基座。假設跑道十分平整,通常是路程。
3. According to the excellent running distance: when purchasing the automatic feeding concrete mixer, the base shall be set according to the application. Assuming that the runway is very flat, it is usually a long distance.
山東自動上料混凝土攪拌灌車的添加潤滑油的留心問題和挑選了解就是這樣了,期望對你有幫助。
Attention and selection of lubricating oil for Shandong automatic feeding concrete mixer truck is just like this. I hope it will be helpful to you.