1. Operators need to work with certificates. It is forbidden to hand over the automatic feeding mixer to unlicensed personnel for operation. During operation, they should concentrate on correct operation and shall not leave their posts without authorization.
2. Before operation, check the fixing, clutch, brake, pulley, steel wire rope, transmission device, hopper limit, electrical circuit, protective neutral connection or grounding wire of the automatic feeding mixer. If there is any abnormality, it must be eliminated.
3. When multi shift operation is implemented, the shift handover system shall be implemented. The shift handover person shall carefully fill in the shift handover record. The work can be carried out only after the successor checks and confirms the elevator and signs it.
4. It is necessary to reasonably use the automatic feeding mixer according to the specified technical performance.
5. After the automatic feeding mixer raises the hopper, no one is allowed to enter under the hopper. When cleaning the hopper, it is necessary to hang a safety chain. When someone enters the mixing drum of the automatic feeding mixer, pull down the isolation switch in the switch box and lock the switch box to avoid personal injury by misoperation.
6. After the operation of the automatic feeding mixer truck is completed, clean the automatic feeding mixer truck, cut off the power supply and lock the switch box.
The above is a detailed introduction to the self loading concrete mixing tank truck. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.rebetdrugs.com/